Skip to content
Home/Answers/Getting started
CANADA SHEDS / Getting started

Getting started: Before You Start Checklist

Getting started: Check area, height, setbacks, utilities and permit.

Updated 2026-11-22About 3 min
Affiliate disclosure: some outbound links go to commercial partners. We currently pass no tracking parameters, so we earn no commission from them; if that changes, this page will say so.
Quick answer

Getting started: Check area, height, setbacks, utilities and permit. start depends on size/height/zone.

Why it matters

The key question with a backyard shed is whether size and height push you into the permit process; many small sheds need none, but past a threshold the full process applies.

Size.

Step by step

  1. Measure footprint and peak height.
  2. Check bylaw thresholds and setbacks.
  3. Confirm utility locates and foundation type.
  4. Apply if required and book staged inspections.

Common mistakes

  • Buying a kit before checking the bylaw.
  • Ignoring setbacks.
  • Skipping utility locates.
  • Skipping a frost-depth foundation.

Checklist

  • Area, height, setbacks, utilities, permit.
  • Planning department.
  • Locate ticket.
  • Frost depth data.

Who it is for

If this is your first Getting started, narrow by Size. and Height. first, then look at specific models.

Key facts

  • Size.
  • Height.
  • Zone.
Getting started: five questions at a glance
QuestionShort answer
Getting started: Kit, Custom or RetrofitGetting started: Compare size, permit complexity and total cost across the three routes. start depends on size/height/zone.
Getting started: What It CostsGetting started: Convert kit, foundation, electrical and permit into a total. start depends on size/height/zone.
Getting started: Spending LessGetting started: Save by shrinking size, reusing an old base and doing the build yourself. start depends on size/height/zone.
Getting started: Permitted vs UnpermittedGetting started: Compare upfront cost against resale and insurance risk. start depends on size/height/zone.

FAQ

Getting started: Before You Start Checklist

Getting started: Check area, height, setbacks, utilities and permit. start depends on size/height/zone.

What should I check before buying a Getting started?

start depends on size/height/zone. Key checks: Size.; Height..

Is a Getting started worth it?

Depends on use, budget and upkeep; a Getting started is not automatically better because it costs more.

Source: Municipal zoning bylaw

Top picks

ProductBest forPrice
Shed KitKitMidSee buying guide
Gravel BaseGravelLowSee buying guide
GFCI KitGFCILowSee buying guide

Sources